How to Clean a One Hitter
Clean a one hitter by scraping loose resin, soaking it in 91% isopropyl alcohol for 30 minutes, scrubbing the bowl and stem with a pipe cleaner, then rinsing with hot water and letting it dry.
Tools
- 91% isopropyl alcohol
- Coarse salt
- Pipe cleaners
- Paper clip or small scraper
- Resealable plastic bag
- Hot water
- Paper towel
Steps
- Scrape the bowl. Use a paper clip to remove loose resin. Tap the one hitter over a trash can.
- Soak in alcohol. Place the one hitter in a resealable bag. Add 91% isopropyl alcohol until covered. Add 1 teaspoon coarse salt. Seal the bag. Shake for 10 seconds. Let sit for 30 minutes.
- Scrub the bowl and stem. Remove the one hitter from the bag. Run a pipe cleaner through the stem. Twist the pipe cleaner. Repeat with a new pipe cleaner until it comes out clean.
- Rinse with hot water. Hold the one hitter with tongs. Run hot water through the bowl and stem for 30 seconds.
- Dry. Place the one hitter on a paper towel. Let it air dry for 10 minutes. Check the stem for moisture.
Safety
Isopropyl alcohol is flammable. Keep it away from open flames. Use it in a room with open windows or a fan. Do not inhale the fumes. Wear gloves if your skin is sensitive. Do not use isopropyl alcohol on painted surfaces or plastic parts that may melt.
One Hitter Review: Top Pick and 4 Alternatives
Frequency
Clean a one hitter after 5 to 10 uses. Resin builds up in the bowl and stem. A dirty one hitter changes the taste and pulls harder. A clean one hitter gives a smoother draw.
Alternatives
If you do not have isopropyl alcohol, use 151-proof grain alcohol. Soak for 1 hour. Or use a commercial pipe cleaner solution. Follow the label directions.